If a company is manufacturing or packaging pharmaceutical products, nutraceutical supplements, or medical devices, they are likely going to require a cleanroom environment. One possible economical solution may be a modular cleanroom.
Below are some manufacturing situations that may need a cleanroom environment:
• Aerospace
• Bulk powders
• General industrial
• Medical device
• Nutraceutical
• Pharmaceutical
• Sampling rooms
Cleanroom solutions do not have to be expensive, difficult, and complicated. Below is a guide that may help you with the process of acquiring a quality modular cleanroom for your needs.
There are ISO class ratings for cleanrooms. The ISO cleanroom class ratings range from 1 to 9. The lower the number, the cleaner, and more sanitary the room. A rating of 1 is the cleanest and most sanitary while a rating of 9 is the least clean and least sanitary. Particles counted in cleanrooms are .5 microns in size or greater. Particle size of .5 micron is so small it can’t be seen with the human eye without magnification of the particle.
Modular cleanrooms for bulk powders, medical devices, nutraceuticals, and sampling room applications can meet the ISO class 7 to 9 categories. HEPA air filtration and the number of air changes per hour are important elements for providing a quality modular cleanroom.
This type of controlled environment is often required in manufacturing to also control levels of humidity, pollutants, pressure, and temperature. A modular cleanroom manufacturer often offers a wide variety of cleanrooms such as aeronautical manufacturing cleanrooms, bio-pharmaceutical cleanrooms, food packaging cleanrooms, scientific labs for biotech and medical device manufacturing, semiconductor cleanrooms, and custom cleanrooms where protective processes demand a critically controlled environment.
Modular cleanrooms must provide a controllable and adaptable structure based on specific applications that will take place inside the cleanroom. Air handling is of utmost importance so a modular cleanroom manufacturer should partner with cleanroom specialists in order to provide a modular cleanroom that will meet required classifications due to design, materials, equipment, and installation.
Cleanroom wall panels must integrate easily with the required stringent equipment in order to meet cleanroom requirements with various ISO ratings and cleanroom classifications – class 1000 cleanrooms(+).
The cleanroom wall panels should provide a solid, moisture resistant, and non-corrosive surface in combination with strong support for the cleanroom’s infrastructure. All cleanroom wall panels should provide an exterior that’s easy to clean.
In some cases, cleanroom wall panels may require additional insulation and sound attenuation. Lastly, cleanroom wall panels should be easy to install and provide a range of requirements for the interior of cleanrooms.