JESCO HOPPERS
Scrap and bulk material pile up fast on a plant floor, and moving it by hand slows everyone down. Jesco hoppers are built for forklift handling, with a dump mechanism that lets you empty a load without manual tipping or shoveling. Jesco self-dumping hoppers come in several steel gauges, with stackable models that save floor space when they're not in use. Tell us what you're collecting and how your forklifts are set up, and we'll help you choose the right hopper.
The newest version of the Low Profile Portable Hopper is without a handle or casters. For use with applications under machinery, by a work station or at the end of a production line. A forklift must be used to move the unit and it cannot free dump. One must use the knees under the front edge to dump assist and to bring the unit back. This unit has a 90 degree dump angle and has a safety retaining chain.
Lead time is approximately 4 weeks.
Painted Vista Green
The specialty Filter Press Hopper is used after the waste water has been eliminated and the filter cake is left.
Box is tapered front and back, square sides sitting on a forklift base. Mobility made easy with 4" x 2" polyurethane casters (non-marking) to position unit where needed. A forklift must be used to empty contents. Safety retaining chain, safety latch, trip handle and a trip rope assembly installed on unit.
Painted Vista Green. Palletized for shipping.
Towable Rotator Box is designed for the collection and storage of bulk materials. The towing tongue (wishbone style) allows for towing at up to 4 mph. Rolls on 8" x 2-1/2" polyurethane casters. Four different sizes are available to handle all your bulk handling of your material.
Custom engineering and custom design assistance is available to fulfill your special project requirements
Suggested applications: Managing shredded material, recycling material, bulk material storage
Lead time is approximately 4 weeks
Painted Vista Green
The Rotator box is designed for the collection and storage of bulk material. The box can be dumped with a rotating fork attachment (not included). Fork openings are 3"x8". Overall height is 39-3 /16”. Box is manufactured from 7 gauge steel with continuously welded seams.
Available in 1 cubic yard to 2.67 cubic yards to handle all your bulk material handling requirements. This rotating box will reduce operation cost, increase productivity and provide a safe method of material handling. Custom engineered and special designs are available. Contact our engineering and sales staff to discuss your specific needs and ideas.
Applications: shredded material, recycled material, bulk material storage, sorting or staging products
Painted Vista Green
Options: Lifting Lugs and Casters
These units are designed for long materials such as bar, pipe, lumber, plastic, tube etc. Can hold large capacities. Trip rope and safety retaining chain are standard
A forklift must be used to transport material
Deck size 48" x 72". Back wall 24" high
Unit is rated at 6,000 lbs. capacity
Casters not available.
Lead time is approximately 4 weeks
Painted Vista Green
With its low profile (20-13/16" to top of bucket) its ideal application is under machinery for catching shavings, steel slugs, or holding small parts. The push handle and 4" x 2" phenolic casters allow for easy maneuvering into place. This unit dumps a full 90 degrees for full and complete content removal. Use forklift to transport and empty contents.
Safety chain is used underneath the unit to secure bucket to the base. Units are welded watertight. Safety latch, trip handle, trip rope assembly and safety retaining chain are standard.
Painted Vista Green.
Lead time is approximately 4 weeks.
All-welded stackable (3 High) 12 gauge body and 8 gauge base self dumping hoppers handle bulk materials and scrap easily. Can be moved with a forklift.
Painted Vista Green.
All-welded Non stackable 10 gauge body and 8 gauge base self dumping hoppers handle bulk materials and scrap easily. Can be moved with a forklift.
Painted Vista Green.
All-welded stackable 7 gauge body and 8 gauge base self dumping hoppers handle bulk materials and scrap easily. Can be moved with a forklift.
Painted Vista Green.
These units are ideal where control of the quantity of material dumped or the speed of discharge is critical. They operate off the hydraulic system of your forklift and come complete with Pioneer style 1/4" male quick-disconnect hoses for easy attachment to the forklift.
The safety committee's dream solution to keep the operator seated on the forklift while discharging contents. Saves time and saves money, a win-win situation.
Fork pockets are spaced 28" on center. Available in 1 /2, 3 /4, 1 , 1-1 /2 and 2 cubic yard capacities. All units have a 4000 lbs weight capacity
Painted Vista Green
Options: casters, lids
These units are designed for long materials to be placed on the flat deck for ease of stacking. Ideal use for this unit is for plasma or laser skeletons.
The extended fork pockets bring the overall length from back against the forklift mast to the front edge of deck platform to 82-1/4". There is a chain underneath the deck attached to the base to limit dump angle. With safety in mind this unit has a safety latch, trip handle, trip rope assembly and a safety retaining chain.
A forklift must be used to transport material.
Deck size 48" x 72". Back wall 24" high.
Unit is rated at 3,000 lbs. capacity.
Casters not available.
Lead time is approximately 4 weeks.
Painted Vista Green
This side pivot hopper is a specialty unit with shortened fork pockets and sloped front edge will allow the bucket to pivot between the casters to fully empty the contents.
The overall height of the unit with the 5" x 2" phenolic swivel casters is only 32".
Safety latch, trip handle, safety retaining chain and a trip rope assembly standard.
A forklift must be used to transport and empty the contents of the unit. This unit will require manual return of the bucket; the bucket will then engage the handle and the operator returns the safety latch to the locked or closed position ready for the next use.
Painted Vista Green.