Alternating Tread Ladder

alternating.PNG
specialty_ladder1.jpg
alternating tread.PNG
madeinamerica.PNG
specialty_ladder2.jpg
alternating.PNG
specialty_ladder1.jpg
alternating tread.PNG
madeinamerica.PNG
specialty_ladder2.jpg

Alternating Tread Ladder

0.00

Complete line of aluminum wall ladders custom fabricated to exact field measurements. Just measure from the ground to the top of where you need to be, we will make the perfect ladder.

Add To Cart

Aluminum Alternating Tread Stair is an alternative to a traditional ships stair.   Compared to conventional stair treads, these stairs allow the user to descend face-forward giving a clear view of the floor below. Designed with tubular side rails to provide maximum structural integrity while keeping the overall stair weight to a minimum. These stairs are built to project conditions and shipped to the job site completely assembled ready for installation.  For alternating tread ladders accessing a roof, consider combining extend a rail ladder post, roof hatch and guard rail to protect the hatch opening. This gives architects and contractors the option of a complete roof access system from a single source.

Standard Features

  • All components shall be aluminum alloy 6000 (6005-T5 typical)

  • Stringers are 3" x 2" x 1/8" aluminum tubular siderails and a 10" x 1/4" center stringer

  • Treads are aluminum bar grating

  • Available in either 56° or 68° angle of incline

  • 1000 pound load capacity

  • Optional 42" handrail extension (walk-thru) for accessing platform, landings, or other elevated work surfaces. Width of 24" for roof hatch access, 28" for walk-thru models.

  • Mill Finish is standard; anodized or powder coated are optional finishes

WHEN YOU PURCHASE A LADDER FROM DIVERSE SUPPLY, YOU ARE SIMULTANEOUSLY AGREEING THAT DIVERSE SUPPLY IS NOT LIABLE FOR ANY INJURY OR PROPERTY DAMAGE RELATED TO THE USE OF THE LADDER